Forum Menu

Low Cost Raspberry Pi Contoller Board

More
2 years 5 months ago - 2 years 5 months ago #300223 by meister
Replied by meister on topic Low Cost Raspberry Pi Contoller Board
5x stepper + 2x RC-Servo:

www.youtube.com/shorts/XxYy4lUPYxA
Last edit: 2 years 5 months ago by meister.
The following user(s) said Thank You: Project_Hopeless

Please Log in or Create an account to join the conversation.

More
2 years 5 months ago #300260 by Project_Hopeless
Replied by Project_Hopeless on topic Low Cost Raspberry Pi Contoller Board

7I96S firmware with P1 pinout for the common "Mach 5 Axis BOB"
2 additional step/dir channels (7 total) and 4 RCPWMgens on the BOB

 

File Attachment:

File Name: 7i96s_5abobrcd.zip
File Size:265.37 KB


 
So correct me if I'm wrong.  The firmware sets up the bob as an extension of the 7i96?  So with MesaTool2 or Pconf what type of bob do I define P1 as? 

Is there a tutorial somewhere showing how to incorporate a Mach3/5 bob with a Mesa card? 

Please Log in or Create an account to join the conversation.

Moderators: PCW, jmelson
Time to create page: 0.051 seconds
Powered by Kunena Forum