Low Cost Raspberry Pi Contoller Board

More
2 years 6 months ago #297840 by tommylight


github.com/cakeslob/RRW_LAB
Normally i would ask "where is the price", but given the current state of RPI exorbitant prices, i am skipping it for the foreseeable future. :)
This is the current actual pricing here, see if you can spot a glaring issue:

Please Log in or Create an account to join the conversation.

More
2 years 6 months ago #297841 by Cant do this anymore bye all
Tommy I can actually believe that, but those prices look really high for both models. The RPi5 "broke" a lot of what works with the RPi4, especially if you want to play with gpios.

Please Log in or Create an account to join the conversation.

More
2 years 6 months ago #297842 by cakeslob
dont worry tommy, you can use ethernet also

Please Log in or Create an account to join the conversation.

More
2 years 6 months ago - 2 years 6 months ago #297844 by elovalvo


Normally i would ask "where is the price", but given the current state of RPI exorbitant prices, i am skipping it for the foreseeable future. :
This is the current actual pricing here, see if you can spot a glaring issue:


The prices of that supplier are exaggerated.
This is the site of a distributor in Italy  ( www.melopero.com/shop/raspberry-pi/raspberry-pi-5-8gb/ )

 
Last edit: 2 years 6 months ago by elovalvo.

Please Log in or Create an account to join the conversation.

More
2 years 6 months ago #297850 by tommylight
Did anyone notice the RPI4/8gb is more expensive than RPI5/8gb ?
Still, at 90E it is to much.
BTW, sometimes, i get nice deals on that website, being a good customer n stuff, they are the only ones that actually work here, they deliver to my door and they never failed to deliver whatever i ordered there, even when the price listed was wrong , example got 2 of Creality CR-5 PRO for 656 Euro total when the price was $1300 in china, for one!
So i can justify a bit higher prices for sure, but not for RPI.
End rant.
So what are the prices for ethernet variants?

Please Log in or Create an account to join the conversation.

More
2 years 6 months ago #297859 by Cant do this anymore bye all
Yeah I did and put forward a reason why. The 5 kinda broke a bit the RPi ecosystem for using the gpios, a lot of mature code won’t work on the 5.
Computation wise it is a beast for a SBC.
The following user(s) said Thank You: tommylight, Project_Hopeless

Please Log in or Create an account to join the conversation.

Moderators: PCW, jmelson
Time to create page: 0.064 seconds
Powered by Kunena Forum