Forum Menu

Retrofitting a 3-axis VMC with DC servos - guidance needed

More
3 weeks 2 days ago - 3 weeks 2 days ago #350175 by PCW
Replied by PCW on topic Retrofitting a 3-axis VMC with DC servos - guidance needed
What firmware do you need?

Most have been updated to include the newer PWM module but maybe not all...

7I97T firmware is available here:

www.mesanet.com/software/parallel/7i97t.zip

( This link is in the specifications tab of the 7I97T in Mesa's webstore )

 
Last edit: 3 weeks 2 days ago by PCW.

Please Log in or Create an account to join the conversation.

More
2 weeks 5 days ago #350231 by Japoo_Ness
Replied by Japoo_Ness on topic Retrofitting a 3-axis VMC with DC servos - guidance needed
I found it. I used the 7i97T_7i74d2.bin and this one doesn't have PWM in version 1, they are in 0. If I understand correctly, I can use 7i97T_7i74d.bin since they are functionally equal, and plus, this one does have PWM version 1

Please Log in or Create an account to join the conversation.

Moderators: PCW, jmelson
Time to create page: 0.240 seconds
Powered by Kunena Forum