SmartSerial on cheap ESP32-8ch-Relais Card

no, but you can see the new pins with:

halcmd show

The translation into English is:

"Do I only need this HAL configuration:

loadrt hm2_eth board_ip="10.10.10.10" config="num_encoders=1 num_pwmgens=1 num_stepgens=5 sserial_port_0=0xxxxxxx"

Or are there other settings required as well?"

The translation into English is:

"Is the 7I92 pin compiled as:

10 30 IOPort SSerial 0 TXData0 (Out)
11 31 IOPort SSerial 0 RXData0
?