HAAS VF1 retrofit

I dont have any schematics , used to be able to find diagrams on the DIY Haas website, not sure if it still exists.

After a few years I will be getting back to work on the project soon..

Hopefully will be closing on a house here in a couple weeks and will have a nice hangar sized workshop to set up in...

Hi,
Any update on this project? I have a VF3 (1994) and the mocon make some trouble, eventually I will be forced to make a retrofit like solution.. I hope somehow that I will be able to keep as much as possible from original hardware. I need just the computer part to be replaced..

there are "new" haas Vf3 boards all over you can simply replace the main board if you trouble
also haas provides some nice upgreats for real low money around 800USD
it is money ok but what you get is more then you can expect around 120 suroutines
on mashine part generation ....
call a dealer around you