Let's talk about CAM

More
04 Aug 2016 20:34 #78368 by newbynobi
Replied by newbynobi on topic Let's talk about CAM
Or you look at sim/gmoccapy/gmoccapy_tool_sensor.ini

And enjoy my beautifull GUI with integrated tool measurement option:-)

Norbert

Please Log in or Create an account to join the conversation.

More
04 Aug 2016 20:52 #78369 by remrendes
Replied by remrendes on topic Let's talk about CAM
Hi!

I will have a look, but I have to find it at first :)

Please Log in or Create an account to join the conversation.

More
01 Sep 2016 00:19 #79805 by ericg
Replied by ericg on topic Let's talk about CAM
I installed and took a brief look a blendercam, ouch, it looks non intuitive, is there a good basic intro tutorial out there that does not have annoying background music and/or strong difficult to understand European accents?

Please Log in or Create an account to join the conversation.

More
01 Sep 2016 09:30 #79820 by tarasko
Replied by tarasko on topic Let's talk about CAM

ericg wrote: I installed and took a brief look a blendercam, ouch, it looks non intuitive, is there a good basic intro tutorial out there that does not have annoying background music and/or strong difficult to understand European accents?


It doesn't have yet. Maybe in the near future.

Please Log in or Create an account to join the conversation.

More
01 Sep 2016 13:24 #79831 by tommylight
Replied by tommylight on topic Let's talk about CAM
www.youtube.com/playlist?list=PLe0y_Qk-V...4uiHjUor0TBWykAC-NDk

He is very good at explaining things and does not have annoying music, just look for blendercam, as he has also tutorials for normal blender.
It will take about an hour or 2 to get the basic idea of using it, and from then on it will get easier, much easier.
Blender is a very powerful tool, it just takes a bit of getting used to.
The following user(s) said Thank You: new2linux

Please Log in or Create an account to join the conversation.

Moderators: Skullworks
Time to create page: 0.087 seconds
Powered by Kunena Forum