Best cam software to use for plasma cutting

Hakan wrote:

Can it also do g-code for plasma cutting?
 

Don't have plasma and can't say what is needed, but if you tell me what is missing I can expand it

M3 and plasmac feed rate at the start of every cut And M5 at the end of every cut.
Also simple nesting or just ability to change the order of cuts would be nice to have.
And lead in and lead out with the option of no lead out.

lead in and lead out is implemanted, M3/5 on every cut also,
but no nesting

Maybe this is helpful:

linuxcnc.org/docs/devel/html/plasma/qtpl...tml#_using_qtplasmac