running EMC2 from another PC
15 Oct 2011 23:10 #13939
by nordiste
running EMC2 from another PC was created by nordiste
hi,
i am currently building pick and place machine.
i want to use EMC2 and i make vision program, i would like to use a control program on a PC who send G-code(or other control) to EMC2 controller in real time.
by network or other communication system.
does is that feasible ?
thanks,
marc
i am currently building pick and place machine.
i want to use EMC2 and i make vision program, i would like to use a control program on a PC who send G-code(or other control) to EMC2 controller in real time.
by network or other communication system.
does is that feasible ?
thanks,
marc
Please Log in or Create an account to join the conversation.
17 Oct 2011 00:16 #13958
by andypugh
Replied by andypugh on topic Re:running EMC2 from another PC
You might want emcrsh (or you might want something very different).
linuxcnc.org/docs/html/man/man1/emcrsh.1.html
linuxcnc.org/docs/html/man/man1/emcrsh.1.html
Please Log in or Create an account to join the conversation.
17 Oct 2011 19:16 #13994
by nordiste
Replied by nordiste on topic Re:running EMC2 from another PC
many thanks for the link.
i think this is what i need
i am seeing if i can send Gcode via network with this program.
thanks for help.
marc
i think this is what i need
i am seeing if i can send Gcode via network with this program.
thanks for help.
marc
Please Log in or Create an account to join the conversation.
Time to create page: 0.153 seconds