LinuxCNC in Sweden?
- Legonilsson
- Offline
- New Member
-
Less
More
- Posts: 1
- Thank you received: 0
22 Sep 2012 18:35 #24555
by Legonilsson
LinuxCNC in Sweden? was created by Legonilsson
Is there anyone who has built or rebuilt a machine in Sweden and used
LinuxCNC.?
I have an old Lathe with some mixed up controlsystem built by Fanuc
and Siemens from -83. This machine I want to rebuild.
So is there anyone, who can help me with this, I'm prepare
to pay for it!
BRG
Legonilsson
LinuxCNC.?
I have an old Lathe with some mixed up controlsystem built by Fanuc
and Siemens from -83. This machine I want to rebuild.
So is there anyone, who can help me with this, I'm prepare
to pay for it!
BRG
Legonilsson
Please Log in or Create an account to join the conversation.
24 Sep 2012 12:07 #24581
by andypugh
Replied by andypugh on topic Re:LinuxCNC in Sweden?
Legonilsson wrote:
I would suggest dropping in on the IRC during the evening, there are tyypically a couple of Swedish LinuxCNCers there (though I can't remember the names at the moment)
See the "community" link at the top for IRC details. And be prepared to leave the window open for a few hours while you do other stuff, a lot of the people there only scan new messages every hour or so
There are a few that I know of. (We used to have a user map, which was useful for this sort of question).Is there anyone who has built or rebuilt a machine in Sweden and used
LinuxCNC.?
I would suggest dropping in on the IRC during the evening, there are tyypically a couple of Swedish LinuxCNCers there (though I can't remember the names at the moment)
See the "community" link at the top for IRC details. And be prepared to leave the window open for a few hours while you do other stuff, a lot of the people there only scan new messages every hour or so
Please Log in or Create an account to join the conversation.
Time to create page: 0.061 seconds