controled emc by PLC
20 Jan 2013 23:41 #28875
by bobo13
controled emc by PLC was created by bobo13
Hi
I would like you ask you if is it possible controled emc by PLC?
I would like you ask you if is it possible controled emc by PLC?
Please Log in or Create an account to join the conversation.
20 Jan 2013 23:44 #28876
by cncbasher
Replied by cncbasher on topic controled emc by PLC
can you be more specific as to requirement and need ?
linuxcnc has a PLC implemented within called classic ladder .
linuxcnc has a PLC implemented within called classic ladder .
Please Log in or Create an account to join the conversation.
21 Jan 2013 19:54 #28914
by bobo13
Replied by bobo13 on topic controled emc by PLC
Yes of course, I looking for information using emc as robot station, but control one station is just for fun. If should be possible controlled by PLc more stations it will be for serious work
Please Log in or Create an account to join the conversation.
Time to create page: 0.158 seconds