1. General
  3. General LinuxCNC Questions
  5. THC300 float switch config

THC300 float switch config

More
29 Apr 2013 21:13 #33396 by BigJohnT
Replied by BigJohnT on topic THC300 float switch config
Yes the G38.4 Z50 (Probe to find the switch open) in absolute mode wants to go as far as Z50 and with Z5 as your limit you get the error.

John

Please Log in or Create an account to join the conversation.

  1. General
  3. General LinuxCNC Questions
  5. THC300 float switch config
Time to create page: 0.069 seconds
Powered by Kunena Forum