Advice
- nissjay
- Offline
- New Member
-
Less
More
- Posts: 17
- Thank you received: 0
15 May 2014 19:00 #46959
by nissjay
Advice was created by nissjay
Hi,
I am glad to say that all problem with my video card sort out and linux cnc is up and running smoothly. As I am very new to linux cnc I would like to get some advice how I
start a program by scratch and write my own gcodes starting from one axis to so on to multiple axis.
Please advice.
Thanks
Re NissJay
I am glad to say that all problem with my video card sort out and linux cnc is up and running smoothly. As I am very new to linux cnc I would like to get some advice how I
start a program by scratch and write my own gcodes starting from one axis to so on to multiple axis.
Please advice.
Thanks
Re NissJay
Please Log in or Create an account to join the conversation.
- BigJohnT
-
- Offline
- Administrator
-
Less
More
- Posts: 7000
- Thank you received: 1175
16 May 2014 04:31 #46970
by BigJohnT
Replied by BigJohnT on topic Advice
I have a G code tutorial here.
gnipsel.com/linuxcnc/g-code/index.html
Of course the User Manual is also good reading.
JT
gnipsel.com/linuxcnc/g-code/index.html
Of course the User Manual is also good reading.
JT
Please Log in or Create an account to join the conversation.
Time to create page: 0.078 seconds