Turning an output on and off...
08 Sep 2015 19:42 #62260
by andypugh
If you decide on a custom component:
linuxcnc.org/docs/html/hal/comp.html
And possibly:
linuxcnc.org/docs/html/hal/halmodule.html
The HAL components all appear under "Realtime components and kernel modules" here:
linuxcnc.org/docs/html/
Replied by andypugh on topic Turning an output on and off...
WOW, so many new things.... a learning experience rather than a problem
If you decide on a custom component:
linuxcnc.org/docs/html/hal/comp.html
And possibly:
linuxcnc.org/docs/html/hal/halmodule.html
The HAL components all appear under "Realtime components and kernel modules" here:
linuxcnc.org/docs/html/
Please Log in or Create an account to join the conversation.
- racedirector
- Offline
- Elite Member
-
Less
More
- Posts: 267
- Thank you received: 42
08 Sep 2015 19:44 #62261
by racedirector
Replied by racedirector on topic Turning an output on and off...
Again, thank you.
As a side note, I am enjoying my experience with LinuxCNC more than I ever did with Mach. Now if I can just find or build a screen I really like
As a side note, I am enjoying my experience with LinuxCNC more than I ever did with Mach. Now if I can just find or build a screen I really like
![:) :)](/media/kunena/emoticons/smile.png)
Please Log in or Create an account to join the conversation.
Time to create page: 0.099 seconds