Spindle synchronized motion with gear

@PCW: Yes I totally agree. But in my case it doesn't happen on a integer multiple.

But this is no problem for the way my customer wants to use it.
For him it is only important that the z-axis is geared to the spindle no matter of the starting index.


Greets Rene

REEEN wrote: But this is no problem for the way my customer wants to use it.
For him it is only important that the z-axis is geared to the spindle no matter of the starting index.

Rigid tapping should work OK, but rigid peck-tapping will not work. Not many people use rigid peck tapping.

Spindle orientation won't work, but if the machine needed that then there would be a spindle home sensor already.

Yes Andy you are right.

Orientation is not needed, as you mentioned, if it would be needed there musst be a sensor.