6i25-7i77 Comunication errors

Hi,

I managed to get my machine on Weezy, and brought it back to 2.6, for the time being, it gives errors, but I can continue to run linuxcnc. Thanks for all you help so far for everyone involved. At least I can continue with the machine now...

I would expect 2.7.4 to be released any day but if anyone else could try the branch it would be great.

JT

Thank you for your help John. I will try it on another machine, over the weekend, but for now I need to complete the current machine. My client is getting anxious to receive their machine.

Just as a matter of interest, Has the communication errors been solved yet?

What is strange to me is that the machines that I did before 2015, with older cards, I run on 6i25-7i77PNG, with no errors what so ever on 2.7.3.... This leaves me to think that something changed on the cards.

anyway... I'm running all the newer machines on 2.6.12, and I am too nervous to upgrade, or make any changes. So although it still gives errors, at least it is not fatal.

I have recently started switching over to wheezy, (using USpace, and versionRT) with 7i92-7i77, this seems great, and will definitely be my way forward.

Thanks to everyone for your input so far. I appreciate it.

The communication errors are fixed in linuxcnc 2.7.4

Hi Peter,

Thank you very much!!! I have tried it this morning, and so far so good!!! (Hallelujah moment)