Start from certain line

I want to start this program from line N220. After giving restart and pressing run, Machine goes to tool change and changes tool T3 that was in previous program block and right after that goes to tool change and changes tool needed with this block. Is this "normal" behaviour or am I missing something?

N10 G21 G17 G90
N20 G54
N30 M06 T03(ALPPI)
N40 M03 S1500
N50 X-725. Y-235.
N60 G0 G43 Z50. H03
N70 G81 X-725. Y-235. Z-3. R5. F200 M09
N80 X725. Y-235.
N90 X-375. Y-210.
N100 X-125. Y-210.
N110 X125. Y-210.
N120 X375. Y-210.
N130 X-375. Y-270.
N140 X-125. Y-270.
N150 X125. Y-270.
N160 X375. Y-270.
N170 M09
N180 G80
N185 G0 Z50.
N190 M06 T01(JYRSIN 100MM)
N200 M03 S300
N210 X-765. Y60.
N220 G0 G43 Z6. H01
N230 Z3. M08
N240 G1 Z-1. F420

tero

Ok I made a new observation. If I start from a line that has the last tool of program. LinuxCNC goes thru all tool changes from first to last in order they appear in Gcode. Why ? I am running 2.8 and Have an ATC.

Tero