Fullscreen - Startscreen

Start
Prev
1
Next
End

Holzwurm56
Offline
Premium Member

30 Dec 2016 07:42 #84904 by Holzwurm56

Fullscreen - Startscreen was created by Holzwurm56

Hello,
what can I do that LinuxCNC starts in fullscreenmodus? In windows i can select this. What is the way in linux?

Thanks

Hans

Please Log in or Create an account to join the conversation.

tommylight
Away
Moderator

30 Dec 2016 07:56 #84905 by tommylight

Replied by tommylight on topic Fullscreen - Startscreen

forum.linuxcnc.org/forum/21-axis/29735-axis-modifications

Please Log in or Create an account to join the conversation.

newbynobi
Offline
Platinum Member

30 Dec 2016 17:28 #84918 by newbynobi

Replied by newbynobi on topic Fullscreen - Startscreen

If you use gmoccapy as GUI, you can set the start mode on the settings page.

Norbert

Please Log in or Create an account to join the conversation.

Holzwurm56
Offline
Premium Member

30 Dec 2016 17:45 - 30 Dec 2016 17:45 #84921 by Holzwurm56

Replied by Holzwurm56 on topic Fullscreen - Startscreen

Hello Newbynobi,
i will be happy when i am able to run my machine with linuxcnc and axis. I think Gmoccapy will be to difficult for me, about axis are more informations in the www available.

Thanks

Hans

Last edit: 30 Dec 2016 17:45 by Holzwurm56.

Please Log in or Create an account to join the conversation.

newbynobi
Offline
Platinum Member

30 Dec 2016 17:50 #84923 by newbynobi

Replied by newbynobi on topic Fullscreen - Startscreen

The difference is only the DISPLAY Entry in you Ini file ;-)

Norbert

Please Log in or Create an account to join the conversation.

Start
Prev
1
Next
End

Time to create page: 0.349 seconds