FANUC Serial I/O Link protocol???
26 Feb 2017 21:24 #88644
by jCandlish
FANUC Serial I/O Link protocol??? was created by jCandlish
Hello Forum
I'm looking more closely at Fanuc integration and am investigating their serial communication protocol. Is is apparently OPCN-1 otherwise know as JIS B 3511:1999, a Japanese Industrial Standard.
I have found a not particularly useful to me Japanese Language copy of this standard on the internet. I'm hoping a LinuxCNC forum member can point me to an English Language version of this document.
www.webstore.jsa.or.jp/webstore/Com/Flow...IS&status=1&pageNo=0
Thanks!
I'm looking more closely at Fanuc integration and am investigating their serial communication protocol. Is is apparently OPCN-1 otherwise know as JIS B 3511:1999, a Japanese Industrial Standard.
I have found a not particularly useful to me Japanese Language copy of this standard on the internet. I'm hoping a LinuxCNC forum member can point me to an English Language version of this document.
www.webstore.jsa.or.jp/webstore/Com/Flow...IS&status=1&pageNo=0
Thanks!
Please Log in or Create an account to join the conversation.
- tommylight
-
- Away
- Moderator
-
Less
More
- Posts: 18515
- Thank you received: 6184
27 Feb 2017 05:58 #88653
by jCandlish
Actually no. I've examined those documents already and they are not sufficient.
Thanks.
Replied by jCandlish on topic FANUC Serial I/O Link protocol???
This should do
Actually no. I've examined those documents already and they are not sufficient.
Thanks.
Please Log in or Create an account to join the conversation.
Time to create page: 0.073 seconds