suggestions for putting together a new PC for LinuxCNC
30 Sep 2017 17:32 #99690
by MAG45
Replied by MAG45 on topic suggestions for putting together a new PC for LinuxCNC
Is there a certain type/brand PCI parallel port that works best with linux?
Please Log in or Create an account to join the conversation.
03 Oct 2017 21:56 #99866
by andypugh
Replied by andypugh on topic suggestions for putting together a new PC for LinuxCNC
Are you actually going to use the parallel port? You seemed to be talking Mesa.
Please Log in or Create an account to join the conversation.
03 Oct 2017 22:09 #99868
by MAG45
Replied by MAG45 on topic suggestions for putting together a new PC for LinuxCNC
I honestly dont know, still trying to figure out the most reliable route. Its still confusing to me. Just need to put together a list of compatible parts from the PC to the stepper drivers and start collecting the parts.
I now have a questionable PC with a Pport that i cant verify works right. Going to a CNC4PC BoB that doesnt seem to be recognizing most of my inputs Going to geko drivers.. Sometimes it will work, sometimes not.
I now have a questionable PC with a Pport that i cant verify works right. Going to a CNC4PC BoB that doesnt seem to be recognizing most of my inputs Going to geko drivers.. Sometimes it will work, sometimes not.
Please Log in or Create an account to join the conversation.
Time to create page: 0.063 seconds