rastor to vector
- allenwg2005
- Topic Author
- Offline
- Platinum Member
Less
More
- Posts: 330
- Thank you received: 4
22 Nov 2017 20:01 #102214
by allenwg2005
rastor to vector was created by allenwg2005
Hi Folks,
Years ago I remember loading a raster ( a jpg I think) into LCNC and getting G-code.
Can someone please point me to the how to on that in the manual so I can re-familiarize myself with it?
Thanks in advance
Years ago I remember loading a raster ( a jpg I think) into LCNC and getting G-code.
Can someone please point me to the how to on that in the manual so I can re-familiarize myself with it?
Thanks in advance
Please Log in or Create an account to join the conversation.
- Todd Zuercher
- Away
- Platinum Member
Less
More
- Posts: 4963
- Thank you received: 1369
22 Nov 2017 21:07 #102221
by Todd Zuercher
Replied by Todd Zuercher on topic rastor to vector
Here is the link to the manual.
www.linuxcnc.org/docs/2.7/html/gui/image-to-gcode.html
www.linuxcnc.org/docs/2.7/html/gui/image-to-gcode.html
The following user(s) said Thank You: allenwg2005
Please Log in or Create an account to join the conversation.
- allenwg2005
- Topic Author
- Offline
- Platinum Member
Less
More
- Posts: 330
- Thank you received: 4
23 Nov 2017 00:35 #102231
by allenwg2005
Replied by allenwg2005 on topic rastor to vector
Thanks Todd,
Man it's been years sense I've had a chance to read a post from you!
Good to know you're still out there.
~Allen
Man it's been years sense I've had a chance to read a post from you!
Good to know you're still out there.
~Allen
Please Log in or Create an account to join the conversation.
Time to create page: 0.308 seconds