signal bb1 maho GR400 C
- yahiyaoui
- Offline
- New Member
-
Less
More
- Posts: 2
- Thank you received: 0
17 Dec 2017 22:31 #103257
by yahiyaoui
signal bb1 maho GR400 C was created by yahiyaoui
Hello everyone,
I am new here, I have a lathe cnc maho GR400 C, when I press the start button to start the hydraulic, an error is displayed on the screen (E07) which means from the manual (missing signal Bb1).
I hope you can help me.
thank you in advance.
I am new here, I have a lathe cnc maho GR400 C, when I press the start button to start the hydraulic, an error is displayed on the screen (E07) which means from the manual (missing signal Bb1).
I hope you can help me.
thank you in advance.
Please Log in or Create an account to join the conversation.
- Todd Zuercher
-
- Offline
- Platinum Member
-
Less
More
- Posts: 4998
- Thank you received: 1459
18 Dec 2017 01:36 #103263
by Todd Zuercher
Replied by Todd Zuercher on topic signal bb1 maho GR400 C
Unless your Maho has been retrofitted to Linuxcnc we are not going to be much help. Maybe try asking on a more Maho specific site.
Please Log in or Create an account to join the conversation.
Time to create page: 0.078 seconds