challange mesa 5i24
- mpvriens
- Offline
- Premium Member
-
Less
More
- Posts: 101
- Thank you received: 0
31 Jan 2018 17:08 #105238
by mpvriens
Have flashed a 25 bit file to my board, 5i24-25-Rohs Lot#14103L1 , tried to flash a 16 bit file again, but :error board not found,
Then have moved W7 to go to second eprom
Red led still on,
If I want to reach the board, got the message: board not found
challange mesa 5i24 was created by mpvriens
Have flashed a 25 bit file to my board, 5i24-25-Rohs Lot#14103L1 , tried to flash a 16 bit file again, but :error board not found,
Then have moved W7 to go to second eprom
Red led still on,
If I want to reach the board, got the message: board not found
Please Log in or Create an account to join the conversation.
- PCW
-
- Away
- Moderator
-
Less
More
- Posts: 18594
- Thank you received: 5114
31 Jan 2018 17:28 #105240
by PCW
Replied by PCW on topic challange mesa 5i24
Did you power cycle after moving the jumper?
If both EEPROMS have been corrupted the card must be returned to Mesa to re-initialize
If both EEPROMS have been corrupted the card must be returned to Mesa to re-initialize
Please Log in or Create an account to join the conversation.
- mpvriens
- Offline
- Premium Member
-
Less
More
- Posts: 101
- Thank you received: 0
31 Jan 2018 17:32 #105241
by mpvriens
Replied by mpvriens on topic challange mesa 5i24
Did power cycle, so i'll send the card back to Mesa
Please Log in or Create an account to join the conversation.
Time to create page: 0.125 seconds