Lathe Homing questions
11 Sep 2018 22:36 #117366
by dextaca
Lathe Homing questions was created by dextaca
Gents
wondering when in lthe mode, the y-axis is not displaying but it appears in the coordinates mode. It will not move in MDI unless homed.. how do you home it when y cannot be selected?
wondering when in lthe mode, the y-axis is not displaying but it appears in the coordinates mode. It will not move in MDI unless homed.. how do you home it when y cannot be selected?
Please Log in or Create an account to join the conversation.
12 Sep 2018 04:54 #117381
by cmorley
Replied by cmorley on topic Lathe Homing questions
Lathes don't usually have a Y axis.
Sounds like it's miss configured but you didn't give us much to go on.
Chris M
Sounds like it's miss configured but you didn't give us much to go on.
Chris M
Please Log in or Create an account to join the conversation.
12 Sep 2018 11:18 #117386
by dextaca
Replied by dextaca on topic Lathe Homing questions
yes I did.. I've left the Y axes in the .ini .. Fixed it yesterday night.. Doing MPG this morning and later this week the tool changer.. ( will bug you guys a lot..
)
thank you all for the quick replies..
cheers
![;) ;)](/media/kunena/emoticons/wink.png)
thank you all for the quick replies..
cheers
Please Log in or Create an account to join the conversation.
Time to create page: 0.082 seconds