Step/Dir out of mesa 7i77

editux
Offline
New Member

01 Mar 2023 21:33 #265676 by editux

Replied by editux on topic Step/Dir out of mesa 7i77

hi lecki85

I need some information about Metba MB-25 CNC. I am performing a retrofit. I am looking for maintenance manual or other technical information about the machine. If you have any information I would appreciate the contact.

Regard

Pedro Portugal

Please Log in or Create an account to join the conversation.

andypugh
Offline
Moderator

02 Mar 2023 14:43 #265723 by andypugh

Replied by andypugh on topic Step/Dir out of mesa 7i77

Lecki85 posted 5 times 5 years ago. It is very likely that he is no longer paying attention.

Please Log in or Create an account to join the conversation.

lecki85
Offline
New Member

28 Mar 2023 07:25 #267673 by lecki85

Replied by lecki85 on topic Step/Dir out of mesa 7i77

Sorry for the late reply. The Metba-Project iss still waiting for me. I will send you some information as PN.

Please Log in or Create an account to join the conversation.

andypugh
Offline
Moderator

28 Mar 2023 12:17 #267691 by andypugh

Replied by andypugh on topic Step/Dir out of mesa 7i77

lecki85 wrote:
Sorry for the late reply. The Metba-Project iss still waiting for me. I will send you some information as PN.

I don't think that the Private Message system works. Probably safest to put the info here.

Please Log in or Create an account to join the conversation.

Time to create page: 0.087 seconds