1. LinuxCNC
  3. General LinuxCNC Questions
  5. Help both "Nativecam" and "Probe screen"

Help both "Nativecam" and "Probe screen"

More
29 Oct 2018 15:00 #119596 by gantarone
Help both "Nativecam" and "Probe screen" was created by gantarone
I can not start linuxcam with both "Nativecam" and "Probe screen"
error:
HAL: ERROR: duplicate component name 'gladevcp'
*** GLADE VCP ERROR: Asking for a HAL component using a name that already exists.

I think because they use them "gladevcp"..... can someone help me?
Thanks

ps :attached my test ini
Attachments:

Please Log in or Create an account to join the conversation.

More
29 Oct 2018 15:09 - 29 Oct 2018 15:09 #119598 by gantarone
Replied by gantarone on topic Help both "Nativecam" and "Probe screen"
SOLVED!!!!
change
EMBED_TAB_COMMAND=halcmd loadusr -Wn gladevcp gladevcp -c gladevcp -u python/probe_screen.py -x {XID} probe_icons/probe_screen.glade
in
EMBED_TAB_COMMAND=halcmd loadusr -Wn cladevcp gladevcp -c cladevcp -u python/probe_screen.py -x {XID} probe_icons/probe_screen.glade
Last edit: 29 Oct 2018 15:09 by gantarone.

Please Log in or Create an account to join the conversation.

More
30 Oct 2018 14:32 #119644 by andypugh
Replied by andypugh on topic Help both "Nativecam" and "Probe screen"
-Wn nativecam / -Wn probescreen might make for a clearer HAL setup.

Please Log in or Create an account to join the conversation.

More
31 Oct 2018 22:21 #119731 by gantarone
Replied by gantarone on topic Help both "Nativecam" and "Probe screen"
Yes!!!
Thanks!!!

Please Log in or Create an account to join the conversation.

  1. LinuxCNC
  3. General LinuxCNC Questions
  5. Help both "Nativecam" and "Probe screen"
Time to create page: 0.067 seconds
Powered by Kunena Forum