LinuxCNC site
- dennis.lewis5
- Offline
- Junior Member
-
Less
More
- Posts: 26
- Thank you received: 5
30 Oct 2018 17:02 #119647
by dennis.lewis5
LinuxCNC site was created by dennis.lewis5
I have not been able to get to the linuxcnc.org site for some time. Is it still out there?
Please Log in or Create an account to join the conversation.
- tommylight
-
- Away
- Moderator
-
Less
More
- Posts: 19536
- Thank you received: 6558
30 Oct 2018 17:16 #119648
by tommylight
Replied by tommylight on topic LinuxCNC site
It is working.
The following user(s) said Thank You: dennis.lewis5
Please Log in or Create an account to join the conversation.
- andypugh
-
- Offline
- Moderator
-
Less
More
- Posts: 23178
- Thank you received: 4865
31 Oct 2018 10:57 #119695
by andypugh
You can try checking at this site
downforeveryoneorjustme.com/
(seriously, that's a real URL and a useful tool).
I am not aware of any problems with linuxcnc.org in recent weeks.
Replied by andypugh on topic LinuxCNC site
I have not been able to get to the linuxcnc.org site for some time. Is it still out there?
You can try checking at this site
downforeveryoneorjustme.com/
(seriously, that's a real URL and a useful tool).
I am not aware of any problems with linuxcnc.org in recent weeks.
The following user(s) said Thank You: dennis.lewis5
Please Log in or Create an account to join the conversation.
- dennis.lewis5
- Offline
- Junior Member
-
Less
More
- Posts: 26
- Thank you received: 5
01 Nov 2018 03:06 #119746
by dennis.lewis5
Replied by dennis.lewis5 on topic LinuxCNC site
I found the problem was with my router. I rebooted and was able to reach the site. Thanks for the feedback.
Please Log in or Create an account to join the conversation.
Time to create page: 0.120 seconds