http://www.linuxcnc.org/handbook/RS274NGC_3/RS274NGC_38a.html#999268

Start
Prev
1
Next
End

svend-ev
Offline
New Member

17 Nov 2018 12:06 #120893 by svend-ev

http://www.linuxcnc.org/handbook/RS274NGC_3/RS274NGC_38a.html#999268 was created by svend-ev

Hello

I am new, in the forum. And be patient, English i is not my favorite language.

www.linuxcnc.org/handbook/RS274NGC_3/RS274NGC_38a.html#999268

I found the previous link at "./home/linuxcnc/nc_files/examples/comp311.ngc"

But it is not working?

--
svend-ev

Please Log in or Create an account to join the conversation.

andypugh
Offline
Moderator

19 Nov 2018 15:49 #120999 by andypugh

Replied by andypugh on topic http://www.linuxcnc.org/handbook/RS274NGC_3/RS274NGC_38a.html#999268

linuxcnc.org/docs/2.7/html/gcode/tool-compensation.html

Is the not-quite-so-ancient link

Please Log in or Create an account to join the conversation.

Start
Prev
1
Next
End

Time to create page: 0.056 seconds