7i92M default IP

hm2_eth: ERROR: 102.168.1.121: Could not retrieve mac address
you have a typo in the ip address (should be 192.168.1.121)

PCW wrote: hm2_eth: ERROR: 102.168.1.121: Could not retrieve mac address
you have a typo in the ip address (should be 192.168.1.121)

ME <== SLAP

Thanks for pointing out the obvious.... It's working....

sorry to jump into the middle of this but I am trying to get a 7i92M to work with RasPi 4. I can ping 10.10.10.11 but cannot get mesa flash to install following the the instructions listed at github.com/jethornton/mesaflash . I'm able to see the files in the directory but this is the received error make: *** [Makefile:70: mesaflash] Error 1 any help is appreciated.

Can you copy-paste a directory listing, your command, and all messages from make?

I have built mesaflash from JETs github source on a RPI3 but i had built LinuxCNC from source on that system so all the tools were there

Thank you for taking a look at this. I'm not familiar enough with Raspian to know if this is incorrect directory or just using the wrong command.

---

pi@cnc:~/mesaflash/mesaflash $ ls
anyio.c eeprom_remote.c hostmot2.o pci_encoder_read.o
anyio.h eeprom_remote.h lbp16.c serial_boards.c
anyio.o eeprom_remote.o lbp16.h serial_boards.h
bitfile.c encoder_module.c lbp16.o serial_boards.o
bitfile.h encoder_module.h lbp.c spi_boards.c
bitfile.o encoder_module.o lbp.h spi_boards.h
boards.h epp_boards.c lbp.o spi_boards.o
common.c epp_boards.h libanyio.a sserial_module.c
common.h epp_boards.o libpci.dll sserial_module.h
common.o eth_boards.c Makefile sserial_module.o
eeprom.c eth_boards.h mesaflash.c types.h
eeprom.h eth_boards.o mesaflash.o usb_boards.c
eeprom_local.c examples pci_analog_write.o usb_boards.h
eeprom_local.h hostmot2.c pci_boards.c usb_boards.o
eeprom_local.o hostmot2_def.h pci_boards.h WinIo32.dll
eeprom.o hostmot2.h pci_boards.o WinIo32.sys
pi@cnc:~/mesaflash/mesaflash $ sudo ./Makefile
./Makefile: 20: ./Makefile: TARGET: not found
./Makefile: 21: ./Makefile: LIBNAME: not found
./Makefile: 22: ./Makefile: LIBNAME: not found
./Makefile: 22: ./Makefile: LIBANYIO: not found
./Makefile: 24: ./Makefile: CC: not found
./Makefile: 25: ./Makefile: RM: not found
./Makefile: 26: ./Makefile: AR: not found
./Makefile: 27: ./Makefile: RANLIB: not found
./Makefile: 28: ./Makefile: MATHLIB: not found
./Makefile: 29: ./Makefile: OPT: not found
./Makefile: 33: ./Makefile: DEBUG: not found
./Makefile: 35: ./Makefile: Syntax error: word unexpected (expecting ")")

Typically you would just type "make" to compile mesaflash (or other simple programs)
(Makefiles are not executable)

perhaps followed by

sudo make install

If you succeed in the first step