Help- can I control a 7w laser on HY-JK02-M 5-axis interface board
17 Dec 2019 11:52 - 17 Dec 2019 11:55 #152789
by shilo14
Help- can I control a 7w laser on HY-JK02-M 5-axis interface board was created by shilo14
I have a HY-JK02-M 5-axis interface board working on my hobby cnc xyz,
I have jut been given a 7watt Laser (neje) with goggles etc (safety first as always
)
I am wondering if I can use pwm to control the laser via gcode.
I attach a manual for the board if it's worth looking at,
Grateful for all help
Thanks guys
LinuxCNC V2.9.0-pre0-868-g57199ba79, 2019-12-03
I have jut been given a 7watt Laser (neje) with goggles etc (safety first as always
)I am wondering if I can use pwm to control the laser via gcode.
I attach a manual for the board if it's worth looking at,
Grateful for all help
Thanks guys
LinuxCNC V2.9.0-pre0-868-g57199ba79, 2019-12-03
Please Log in or Create an account to join the conversation.
Time to create page: 0.048 seconds