Python 3
- satiowadahc
- Topic Author
- Offline
- Senior Member
Less
More
- Posts: 55
- Thank you received: 12
09 Jan 2020 21:10 #154491
by satiowadahc
Python 3 was created by satiowadahc
Alas we've reached the end of python 2's life. It was a good language, but we must go on anyways.
Is there work in progress for python 3 on linuxcnc? I've seen a few threads on github but it seems that many of them are dead ends.
Anyone have thoughts on this?
Is there work in progress for python 3 on linuxcnc? I've seen a few threads on github but it seems that many of them are dead ends.
Anyone have thoughts on this?
Please Log in or Create an account to join the conversation.
09 Jan 2020 23:02 #154496
by cmorley
There has been work:
github.com/LinuxCNC/linuxcnc/issues/403
Unfortunately in linuxcnc projects tend to be done on the side, in a vacuum, with multiple independent authors.
As for python 3 eventuality it will be updated but python 2 is still available.
Chris
github.com/LinuxCNC/linuxcnc/issues/403
Unfortunately in linuxcnc projects tend to be done on the side, in a vacuum, with multiple independent authors.
As for python 3 eventuality it will be updated but python 2 is still available.
Chris
Please Log in or Create an account to join the conversation.
- satiowadahc
- Topic Author
- Offline
- Senior Member
Less
More
- Posts: 55
- Thank you received: 12
09 Jan 2020 23:15 #154499
by satiowadahc
Replied by satiowadahc on topic Python 3
Thanks Chris! I'll start adding what I can to this
Please Log in or Create an account to join the conversation.
Time to create page: 0.065 seconds