Chinese CNC 3020 / 6040 - USB variant
12 Apr 2020 07:09 - 12 Apr 2020 08:23 #163735
by Love
Chinese CNC 3020 / 6040 - USB variant was created by Love
Hi everyone,
What can I do with my CNC 3020 (with Mk1 controller + USB connector cable) to make it work with LinuxCNC?
Do I need only PC with parallel port and cable for that?
What can I do with my CNC 3020 (with Mk1 controller + USB connector cable) to make it work with LinuxCNC?
Do I need only PC with parallel port and cable for that?
Last edit: 12 Apr 2020 08:23 by Love.
Please Log in or Create an account to join the conversation.
12 Apr 2020 10:39 #163739
by andypugh
Replied by andypugh on topic Chinese CNC 3020 / 6040 - USB variant
That would depend on how closely integrated the stepper drivers are to the USB controller. If the USB and stepper drivers are all on one board then it is more difficult. If the stepper drivers are separate units or a separate board, then it is just a matter or wiring.
Please Log in or Create an account to join the conversation.
- tommylight
-
- Away
- Moderator
-
Less
More
- Posts: 18023
- Thank you received: 5983
12 Apr 2020 15:17 #163772
by tommylight
Replied by tommylight on topic Chinese CNC 3020 / 6040 - USB variant
Pictures of everything would help.
This way we do not know what is inside and how are things connected.
This way we do not know what is inside and how are things connected.
Please Log in or Create an account to join the conversation.
Time to create page: 0.146 seconds