Buildbot updates

15 Nov 2020 18:33 #189470 by persei8

Buildbot updates was created by persei8

This is from the buildbot site as of Nov.15

[ ] linuxcnc-uspace_2.8.0.105.gf08c0cb36_amd64.deb 2020-11-15 04:09 11M

and

linuxcnc-uspace_2.9.0~pre0.2917.g0dc3ccf83_amd64.deb 2020-10-27 18:20 11M

Why is 2.8 updating but master is not?
Thank you.

Please Log in or Create an account to join the conversation.

15 Nov 2020 18:45 #189471 by tommylight

Replied by tommylight on topic Buildbot updates

Master is not updating for Stretch and Buster.
I did post about it in the moderator section a few days back, but got no reply for now.

Please Log in or Create an account to join the conversation.

15 Nov 2020 18:53 #189472 by persei8

Replied by persei8 on topic Buildbot updates

Sorry, I don't know what the moderator section is. Is it visible to the general population?

Please Log in or Create an account to join the conversation.

15 Nov 2020 19:19 #189473 by tommylight

Replied by tommylight on topic Buildbot updates

Nope, just moderators and admins.

The following user(s) said Thank You: persei8

Please Log in or Create an account to join the conversation.

Time to create page: 0.074 seconds