My first remote retrofit, machine is moving

Anyone else do remote retrofits?

Years ago I did the programming for a machine that would seal pills in a blister pack remotely (long before Teamviewer or Skype). It was on a GE 90/30 and it worked the first time.

And you are correct, I tried helping out a second guy, but he had no electrical ability at all and couldn't understand my instructions. The first guy didn't understand machines either, but he was good about wiring things up the way that I asked him to and it was no problem.

Hello Guys, i own a 3040T on a JP-3163D Controller board
I am fit in computers but new at CNC...
I could fix the Hardware /Software so that I can move the 3 axles by keyboard via Linuxcnc but when I start a program, the machin stops after some kind of inicialicycing (only the simulation on the screen gos on...) 
I think it is a problem of wrong ranges/calibration...
Anybody out there who can have a look be teamviewer or anydesk?
Thanks to all, have a funny day

...
3040T
BOX: MINI-CNC GRAVING MACHINES , T-D 3 axis Controller
BOARDPLATINE im Controller: JP-3163D - JPQD-jiping V4.1:
TISCH: SHENZHEN SCOTLE TECHNOLOGY LTD. CNC ENGRAVE
MODEL: c
Spindle motor: 230W DC
Size: 51*40*37mm
Spindlespeed: 1100RPM/MIN
Date: 2014.1