Input Status polling Mesa 7176e
17 Feb 2021 17:06 #199164
by hhscott
Input Status polling Mesa 7176e was created by hhscott
Hi Group,
I have a system setup and running with Debian 9/Mesa 7176e. This system is controlled through a Python script utilizing the linuxcnc module/NML commands.
I would like to read the status of inputs 11, 12, 13, and 14 on the Mesa with the above mentioned Python Script. Does anyone know how to go about reading a discrete input on the Mesa using the linuxcnc module?
Thanks,
HH
I have a system setup and running with Debian 9/Mesa 7176e. This system is controlled through a Python script utilizing the linuxcnc module/NML commands.
I would like to read the status of inputs 11, 12, 13, and 14 on the Mesa with the above mentioned Python Script. Does anyone know how to go about reading a discrete input on the Mesa using the linuxcnc module?
Thanks,
HH
Please Log in or Create an account to join the conversation.
17 Feb 2021 17:31 #199166
by Benb
Replied by Benb on topic Input Status polling Mesa 7176e
Have look at this link:
linuxcnc.org/docs/2.8/html/config/python-interface.html
linuxcnc.org/docs/2.8/html/config/python-interface.html
Please Log in or Create an account to join the conversation.
Time to create page: 0.124 seconds