Press Brake
- aluplastvz
- Offline
- Senior Member
-
Less
More
- Posts: 43
- Thank you received: 9
09 Mar 2021 16:37 - 09 Mar 2021 16:41 #201562
by aluplastvz
Press Brake was created by aluplastvz
Hello everyone here on the forum.
I have one more "avanture"
it is a sheet metal bending press /
Did someone do something similar to the end, I read some topics but I found nothing more concise.
The machine has axes
1- Y + Y1
2- Z + Z1
3- X
4- R
- I have linear encoders on Y and Y1
for position feedback
- control Y and Y1
using a proportional valve
Any help is welcome
Greeting
I have one more "avanture"
it is a sheet metal bending press /
Did someone do something similar to the end, I read some topics but I found nothing more concise.
The machine has axes
1- Y + Y1
2- Z + Z1
3- X
4- R
- I have linear encoders on Y and Y1
for position feedback
- control Y and Y1
using a proportional valve
Any help is welcome
Greeting
Last edit: 09 Mar 2021 16:41 by aluplastvz.
Please Log in or Create an account to join the conversation.
- andypugh
-
- Offline
- Moderator
-
Less
More
- Posts: 23178
- Thank you received: 4860
10 Mar 2021 22:46 #201740
by andypugh
Replied by andypugh on topic Press Brake
Presses have come up a few times.
I always seem to end up suggesting a custom interface rather than G-code.
And they seem to disappear and never come back.
So, use G-code. It will be easy.
I always seem to end up suggesting a custom interface rather than G-code.
And they seem to disappear and never come back.
So, use G-code. It will be easy.
Please Log in or Create an account to join the conversation.
Time to create page: 0.048 seconds