it is too fast to use F6000 with G1 to draw a right triangle?

Start
Prev
1
Next
End

curran209
Offline
Senior Member

29 Sep 2021 07:07 #221807 by curran209

it is too fast to use F6000 with G1 to draw a right triangle? was created by curran209

When drawing a right triangle with F6000 G1, right angles become arcs. G4 P0.0000001, it's a right Angle, F200 is a right Angle without G4 waiting. why We use laser to mark the right triangle.

Please Log in or Create an account to join the conversation.

phillc54
Offline
Platinum Member

29 Sep 2021 08:00 #221808 by phillc54

Replied by phillc54 on topic it is too fast to use F6000 with G1 to draw a right triangle?

Do you have path blending set in the gcode?

linuxcnc.org/docs/2.8/html/gcode/g-code.html#gcode:g64

The following user(s) said Thank You: curran209

Please Log in or Create an account to join the conversation.

Start
Prev
1
Next
End

Time to create page: 0.073 seconds