Ethernet controller recommendations
- Jmh474
- Offline
- New Member
-
Less
More
- Posts: 8
- Thank you received: 0
05 Oct 2021 06:33 #222256
by Jmh474
Ethernet controller recommendations was created by Jmh474
Good morning all
just after some advise please, can anyone recommend a Ethernet based controller for linuxcnc.
And one that not to expensive pleaseAt the the moment I'm using 2 parallel port brake out boards and I would like to upgrade them.
Thanks
just after some advise please, can anyone recommend a Ethernet based controller for linuxcnc.
And one that not to expensive pleaseAt the the moment I'm using 2 parallel port brake out boards and I would like to upgrade them.
Thanks
Please Log in or Create an account to join the conversation.
- tommylight
-
- Offline
- Moderator
-
Less
More
- Posts: 19482
- Thank you received: 6533
05 Oct 2021 10:11 #222267
by tommylight
Replied by tommylight on topic Ethernet controller recommendations
Mesa 7i92 or Mesa 7i96 or Mesa 7i76E or Mesa 7i95, for step/dir systems.
Please Log in or Create an account to join the conversation.
- rollfree
- Offline
- Senior Member
-
Less
More
- Posts: 59
- Thank you received: 11
05 Oct 2021 21:58 #222312
by rollfree
Replied by rollfree on topic Ethernet controller recommendations
Don't forget my beloved 7i93.
The following user(s) said Thank You: tommylight
Please Log in or Create an account to join the conversation.
Time to create page: 0.060 seconds