THCAD-300

Start
Prev
1
Next
End

Aldenflorio
Topic Author
Offline
Platinum Member

16 Nov 2021 22:38 #226683 by Aldenflorio

THCAD-300 was created by Aldenflorio

I am building a plasmaCNC table. Mesa is out of the THCAD-10. What’s the difference between THCAD-10 and THCAD-300?

Please Log in or Create an account to join the conversation.

PCW
Away
Moderator

16 Nov 2021 23:06 #226685 by PCW

Replied by PCW on topic THCAD-300

There are a few more THCAD-10s in the store now

Please Log in or Create an account to join the conversation.

Aldenflorio
Topic Author
Offline
Platinum Member

16 Nov 2021 23:25 #226686 by Aldenflorio

Replied by Aldenflorio on topic THCAD-300

Says there aren’t for me

Please Log in or Create an account to join the conversation.

PCW
Away
Moderator

16 Nov 2021 23:31 #226687 by PCW

Replied by PCW on topic THCAD-300

Maybe you need to refresh the page
The store currently shows 5

Please Log in or Create an account to join the conversation.

Aldenflorio
Topic Author
Offline
Platinum Member

16 Nov 2021 23:45 #226688 by Aldenflorio

Replied by Aldenflorio on topic THCAD-300

Found them. Still though. What’s the difference?

Please Log in or Create an account to join the conversation.

PCW
Away
Moderator

17 Nov 2021 00:21 #226690 by PCW

Replied by PCW on topic THCAD-300

The 300 or 10 is the full scale input voltage

The THCAD-300 is for direct connection to plasma voltage
the THCAD-5 and THCAD-10 for for plasma sources with
built in dividers.

Please Log in or Create an account to join the conversation.

Start
Prev
1
Next
End

Time to create page: 0.059 seconds