Mesaflash: No 7i76e board found

Ping 10.10.10.10 is successful. CR8 and CR13 are on. CR3, 5, and 6 change states occasionally, but at least one is usually on.  Ethernet light is on.  What can I do to resolve the problem?

ip a returns the following:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: enp1s0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN group default qlen 1000
link/ether 84:47:09:08:46:07 brd ff:ff:ff:ff:ff:ff
3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
link/ether ec:2e:98:29:69:39 brd ff:ff:ff:ff:ff:ff
inet 192.168.254.14/24 brd 192.168.254.255 scope global dynamic noprefixroute wlan0
valid_lft 11541sec preferred_lft 11541sec
inet6 fe80::251f:1c6b:61c3:e699/64 scope link noprefixroute
valid_lft forever preferred_lft forever

Issue solved. It was a reading comprehension problem. In Network manager, I put 10.10.10.10 instead of 10.10.10.11.