5 axis kinematics
- Ruddy
- Offline
- New Member
-
Less
More
- Posts: 17
- Thank you received: 0
20 Mar 2022 08:08 #237779
by Ruddy
5 axis kinematics was created by Ruddy
I would like to build mini 5 axis cnc kinematics.
I’m afraid to ask this but ..
Is there no 5 axis CAM that can do kinematics on linuxcnc without add/mod the codes ?
I’m not a programmer at all.
any suggestions ?
I’m afraid to ask this but ..
Is there no 5 axis CAM that can do kinematics on linuxcnc without add/mod the codes ?
I’m not a programmer at all.
any suggestions ?
Please Log in or Create an account to join the conversation.
- tommylight
-
- Away
- Moderator
-
Less
More
- Posts: 19479
- Thank you received: 6532
20 Mar 2022 15:00 #237813
by tommylight
Replied by tommylight on topic 5 axis kinematics
Answered on the other thread:
forum.linuxcnc.org/27-driver-boards/4539...is-kinematics#237812
forum.linuxcnc.org/27-driver-boards/4539...is-kinematics#237812
Please Log in or Create an account to join the conversation.
Time to create page: 0.049 seconds