- LinuxCNC
- General LinuxCNC Questions
- Need help configuring mb2hal files for control of parker ac10 vfd
Need help configuring mb2hal files for control of parker ac10 vfd
- Mart45
- Offline
- New Member
-
Less
More
- Posts: 2
- Thank you received: 0
23 Aug 2022 14:22 #250258
by Mart45
Need help configuring mb2hal files for control of parker ac10 vfd was created by Mart45
Hi, would anyone be able to help me configuring the mb2hal files so I can run my cnc lathe spindle via an usb to rs485 dongle.
Regards
Martin
Regards
Martin
Please Log in or Create an account to join the conversation.
- tommylight
-
- Away
- Moderator
-
Less
More
- Posts: 19471
- Thank you received: 6530
24 Aug 2022 18:49 #250342
by tommylight
Replied by tommylight on topic Need help configuring mb2hal files for control of parker ac10 vfd
I have yet to build a mill and then make the VFD work with RS485, so i can not help, but double posting also does not help.
Leaving both topics till someone answers then deleting the one with no answer, or merging them to a single topic.
In the meantime, here is everything regarding mb2hal found on LinuxCNC web and forum:
www.google.com/search?q=mb2hal+site%3Ali...org&aqs=heirloom-srp..
Leaving both topics till someone answers then deleting the one with no answer, or merging them to a single topic.
In the meantime, here is everything regarding mb2hal found on LinuxCNC web and forum:
www.google.com/search?q=mb2hal+site%3Ali...org&aqs=heirloom-srp..
Please Log in or Create an account to join the conversation.
- LinuxCNC
- General LinuxCNC Questions
- Need help configuring mb2hal files for control of parker ac10 vfd
Time to create page: 0.053 seconds