Parallel port problem, but tests OK

tommylight
Away
Moderator

16 Feb 2023 21:56 #264656 by tommylight

Replied by tommylight on topic Parallel port problem, but tests OK

It does not work, as in, the new Debian build of LinuxCNC 2.9 will not work on Mint21 anymore, as it requires Python above 3.11, i think.
And there are no older builds on the Debian servers.
LinuxCNC 2.9 should be officially released soon, poor Andy is pretty much alone in doing that, he could really use some help.

Please Log in or Create an account to join the conversation.

sajurcaju
Offline
Premium Member

16 Feb 2023 22:08 #264659 by sajurcaju

Replied by sajurcaju on topic Parallel port problem, but tests OK

Sorry, still not clear on this. Will my installed version of 2.9/Mint 21 work?

Please Log in or Create an account to join the conversation.

tommylight
Away
Moderator

16 Feb 2023 22:13 #264660 by tommylight

Replied by tommylight on topic Parallel port problem, but tests OK

Yes.
And you can take out the drive from the existing PC and put it in another PC, it will work without reinstalling.

Please Log in or Create an account to join the conversation.

sajurcaju
Offline
Premium Member

16 Feb 2023 23:25 #264670 by sajurcaju

Replied by sajurcaju on topic Parallel port problem, but tests OK

So running 2.8.4/Debian my estop button works. Back to Debian, I guess.
Thanks for the help!

The following user(s) said Thank You: tommylight

Please Log in or Create an account to join the conversation.

Time to create page: 0.053 seconds