MESA 7i76E LinuxCNC
- rmu
-
Topic Author
- Offline
- Elite Member
-
Less
More
- Posts: 277
- Thank you received: 100
06 Apr 2023 09:27 #268396
by rmu
MESA 7i76E LinuxCNC was created by rmu
So you have a Mesa 7i76e and an stm32f103 somewhere connected in an unspecified manner and the variable in linuxcnc is not changing. So what. How do you expect anyone to help you with that kind of utterly incomplete problem statement?
The following user(s) said Thank You: tommylight
Please Log in or Create an account to join the conversation.
- rmu
-
Topic Author
- Offline
- Elite Member
-
Less
More
- Posts: 277
- Thank you received: 100
06 Apr 2023 10:12 #268401
by rmu
Replied by rmu on topic MESA 7i76E LinuxCNC
Only partially clearer.
How did you connect stm32f103 module? What exactly does "I can see my own card ..." mean? Mesa 7i73 is smart serial protocol, not modbus, so I doubt that your modbus card shows up like a 7i73. What is "debug mode"? Debug mode of what? Your card?
How did you connect stm32f103 module? What exactly does "I can see my own card ..." mean? Mesa 7i73 is smart serial protocol, not modbus, so I doubt that your modbus card shows up like a 7i73. What is "debug mode"? Debug mode of what? Your card?
Please Log in or Create an account to join the conversation.
- tommylight
-
- Away
- Moderator
-
Less
More
- Posts: 19463
- Thank you received: 6529
06 Apr 2023 10:24 #268406
by tommylight
Replied by tommylight on topic MESA 7i76E LinuxCNC
Are you aware that Mesa 7i76E has 2 MPG encoder inputs and another high speed one for the spindle?
Also, you posted the same questions on another topic, makes it hard to keep up with what has already been answered, so please do not double post.
Also, you posted the same questions on another topic, makes it hard to keep up with what has already been answered, so please do not double post.
The following user(s) said Thank You: Sadmeatball
Please Log in or Create an account to join the conversation.
- rmu
-
Topic Author
- Offline
- Elite Member
-
Less
More
- Posts: 277
- Thank you received: 100
06 Apr 2023 11:50 #268416
by rmu
Replied by rmu on topic MESA 7i76E LinuxCNC
everybody was a beginner some time, no need to apologize. use google translate.sory my english thanks for your help
Please Log in or Create an account to join the conversation.
- tommylight
-
- Away
- Moderator
-
Less
More
- Posts: 19463
- Thank you received: 6529
06 Apr 2023 12:52 #268424
by tommylight
Replied by tommylight on topic MESA 7i76E LinuxCNC
You are welcomed, always.
Just wanted to be sure you know about it.
Just wanted to be sure you know about it.
Please Log in or Create an account to join the conversation.
Time to create page: 0.053 seconds