7i92t and 5 axis bob no 0-10v on spindle

2 years 8 months ago #294818 by 0jw

Replied by 0jw on topic 7i92t and 5 axis bob no 0-10v on spindle

It works now! that was absolutely the problem. thank you PCW for your help!

Please Log in or Create an account to join the conversation.

2 years 8 months ago #294848 by PCW

Replied by PCW on topic 7i92t and 5 axis bob no 0-10v on spindle

Yes, the 0-10V on the 5ABOB is controlled by PWM.
PWMgen 0 is routed to P2 pin 1 on the 7I92 5ABOB firmware

Please Log in or Create an account to join the conversation.

Time to create page: 0.059 seconds