1. LinuxCNC
  3. General LinuxCNC Questions
  5. GUI

GUI

More
05 Feb 2024 22:30 #292587 by RIDO_JIMO
GUI was created by RIDO_JIMO
Hello everyone,I am delving deeper into my knowledge of LinuxCNC interfaces.
What's the best way and which software should I use to modify GUIs (interfaces)?
I intend to change buttons and callbacks, as well as implement new functions.
Is it possible to do this on Windows, or only on Linux?Thank you!

Please Log in or Create an account to join the conversation.

More
06 Feb 2024 17:50 - 06 Feb 2024 17:52 #292671 by JT
Replied by JT on topic GUI
Just use a text editor but not something like wordpad and make sure to use linux line endings.

Of course I don't see why you want to edit the files in Windblows, LinuxCNC won't run on that OS.

JT
Last edit: 06 Feb 2024 17:52 by JT.

Please Log in or Create an account to join the conversation.

More
06 Feb 2024 17:55 #292672 by my1987toyota
Replied by my1987toyota on topic GUI
or VS code if you want to get fancy.

Please Log in or Create an account to join the conversation.

More
06 Feb 2024 19:20 - 06 Feb 2024 19:20 #292676 by tommylight
Replied by tommylight on topic GUI
Since last week, avoid VS Code as much as humanly possible.
Use Geany
Last edit: 06 Feb 2024 19:20 by tommylight.
The following user(s) said Thank You: JT

Please Log in or Create an account to join the conversation.

More
06 Feb 2024 22:47 #292696 by my1987toyota
Replied by my1987toyota on topic GUI
Wait what happened last week with VS code?

Please Log in or Create an account to join the conversation.

More
06 Feb 2024 23:03 #292699 by tommylight
Replied by tommylight on topic GUI
Not sure but was in the news, something about limiting access or support or subscription or...
I have it on this PC, first chance i get i will format it for sure, even on Linux it does sh#t like downloading stuff without warning/asking/consent and sending huge amounts of info to several severs.
Or to put it simple:
Microsoft = bad
The following user(s) said Thank You: my1987toyota

Please Log in or Create an account to join the conversation.

More
06 Feb 2024 23:15 #292701 by my1987toyota
Replied by my1987toyota on topic GUI
Well that sucks that is who fusion 360 uses to display the Gcode after post process. Just another day in mouse utopia.

Please Log in or Create an account to join the conversation.

More
06 Feb 2024 23:40 #292702 by phillc54
Replied by phillc54 on topic GUI

Not sure but was in the news, something about limiting access or support or subscription or...

Do you have a link, my Google-Fu must have deserted me.
The following user(s) said Thank You: my1987toyota

Please Log in or Create an account to join the conversation.

More
07 Feb 2024 00:27 #292704 by tommylight
Replied by tommylight on topic GUI

Do you have a link, my Google-Fu must have deserted me.

No wonder, all i got was about a gazillion of tutorials.
Had to go back in history (browser history) to find it:
The following user(s) said Thank You: phillc54, my1987toyota

Please Log in or Create an account to join the conversation.

More
07 Feb 2024 00:36 #292705 by phillc54
Replied by phillc54 on topic GUI
Thanks Tommy.

There is nothing there that concerns me so I will stick with VSCode.
 
The following user(s) said Thank You: tommylight

Please Log in or Create an account to join the conversation.

  1. LinuxCNC
  3. General LinuxCNC Questions
  5. GUI
Time to create page: 0.097 seconds
Powered by Kunena Forum