New to probing
24 Feb 2024 23:29 #294282
by JohnAlex3
New to probing was created by JohnAlex3
Hi all, can anyone tell me how to write a program or modify probegrid.ngc, to probe a line moving positive on Z and probing positive on X and record the result of that line/cord?
Please Log in or Create an account to join the conversation.
02 Mar 2024 10:38 #294894
by andypugh
Replied by andypugh on topic New to probing
I would do it with a G-code O-word loop and the (PROBEOPEN, ) etc "magic comments"
linuxcnc.org/docs/stable/html/gcode/o-code.html#ocode:looping
linuxcnc.org/docs/stable/html/gcode/over...#gcode:probe-logging
How comfortable are you with hand-coding G-code?
linuxcnc.org/docs/stable/html/gcode/o-code.html#ocode:looping
linuxcnc.org/docs/stable/html/gcode/over...#gcode:probe-logging
How comfortable are you with hand-coding G-code?
Please Log in or Create an account to join the conversation.
03 Mar 2024 13:24 #295037
by wuxiaoke
Replied by wuxiaoke on topic New to probing
Please Log in or Create an account to join the conversation.
Time to create page: 0.067 seconds