Fehler Rules

Start
Prev
1
Next
End

Edi_48
Offline
Junior Member

15 Apr 2024 09:10 #298276 by Edi_48

Fehler Rules was created by Edi_48

Hallo, ich habe einen Linux-Recher mit Debian 12, Kernel 6.1.0.18-RT und64
Linuxcnc V2.9.0. Feb.2023
Ich habe folgenden Fehler:
Wenn ich einen eintrag /etc/udev/rules.d/99-xhc-hb04.rules
ATTR{idProduct}=="eb70", ATTR{idVendor}=="10ce", MODE= "0666", OWNER="root", GROUP="plugdev"
mache und Linux neu starten und den Befehl lsusb eingegeben bekommen ich keinen Eintrag eb70 oder 10ce
Wen ich im Menü in den Synaptic Paket Manager wechseln möchte kann ich 2mal kliegen aber er öffnet sich nicht.
Egal SU oder sudo
wo liegt der Fehler?
mfg
Hilton

Please Log in or Create an account to join the conversation.

andypugh
Offline
Moderator

20 Apr 2024 10:23 #298711 by andypugh

Replied by andypugh on topic Fehler Rules

Is the XHC pendant actually plugged in?

Please Log in or Create an account to join the conversation.

Edi_48
Offline
Junior Member

27 Apr 2024 09:19 #299174 by Edi_48

Replied by Edi_48 on topic Fehler Rules

Ja unter win 11 wird er erkannt

Please Log in or Create an account to join the conversation.

andypugh
Offline
Moderator

27 Apr 2024 10:34 #299181 by andypugh

Replied by andypugh on topic Fehler Rules

Does it show up in Linux with lsusb?

Please Log in or Create an account to join the conversation.

Edi_48
Offline
Junior Member

27 Apr 2024 13:34 #299185 by Edi_48

Replied by Edi_48 on topic Fehler Rules

Nein

Please Log in or Create an account to join the conversation.

andypugh
Offline
Moderator

29 Apr 2024 08:57 #299305 by andypugh

Replied by andypugh on topic Fehler Rules

Well, that sounds like a Linux problem rather than a LinuxCNC problem.

Maybe this? www.forum.linuxcnc.org/38-general-linuxc...ing-up-as-usb#238667

Please Log in or Create an account to join the conversation.

Start
Prev
1
Next
End

Time to create page: 0.110 seconds