Linuxcnc on my machine?

I managed to install Linuxcnc on an old pc.

It seems for what I want or need.
a 7I95T + THCAD2 would be the way to go.

The thing is my machine is Router/plasma combo with rotary and laser and on top of that a probe will need to be installed.
In the future I will separate the tables.

Thanks to all!

 

I have a plasma with 6 steppers as well

It's working great with qtplasmac, 7i96s, 2thcads one for the one for ohmic, parallel port breakout for the other steppers board running on a ryzen 1600

Couldn't recommend it enough. Use 2.9.2 if you want the rotary to work 2.10 wasn't working with the sheetcam post as of a few months ago.