Queuing MDI Commands - LC2.9.2
- electrosteam
- Offline
- Senior Member
-
Less
More
- Posts: 64
- Thank you received: 4
29 Jul 2024 01:43 #306297
by electrosteam
Queuing MDI Commands - LC2.9.2 was created by electrosteam
My LC2.9.2 is running nicely on a Raspberry Pi 4B with AXIS.
But, it will not accept multiple MDI commands.
I used to be able to do this on the earlier LC2.8.4.
Spent some time checking ini and HAL configurations, and Forum searching, but no joy.
Suggestions ?
John
But, it will not accept multiple MDI commands.
I used to be able to do this on the earlier LC2.8.4.
Spent some time checking ini and HAL configurations, and Forum searching, but no joy.
Suggestions ?
John
Please Log in or Create an account to join the conversation.
- cmorley
- Away
- Moderator
-
Less
More
- Posts: 7769
- Thank you received: 2058
29 Jul 2024 03:49 #306304
by cmorley
Replied by cmorley on topic Queuing MDI Commands - LC2.9.2
Seems to be an AXIS thing. works in qtdragon (I tested in master though)
Please Log in or Create an account to join the conversation.
Time to create page: 0.076 seconds