help with tool setter

I am trying to get a tool length sensor setup and as I have not worked with LinuxCNC in a long time, getting this figured out is going to a be a bit slow.  I would much rather spend my time making stuff than fighting with software. 

This may sound strange but are any of you interested in being paid for a few hours of consulting to help me get things running?

I am in France at the moment (I am am American mechanical engineer who lives in Norway but has a workshop in France just to make things interesting  

I have this setter  www.sorotec.de/shop/Z-Finder-inductiv-PN...865.html?language=en 
and am running a Mesa 7I76-5I25 cards on a small CNC router ( cncwerk.de/forum/viewtopic.php?f=2&t=21) with a ER spindle motor.

Thanks 
Luke 

I'm located 75 km from Oslo and 50 km from Gardermoen. Although I'm not interested in taking on a paying job I have working machine with tool length probe we can go through.

Thanks Andy, I will give it a try and post with my issues I think a saw a demo file to get started with.

The complicating factor is that my workshop is in southern France and I only have a couple of weeks down here to get some parts made before going back to Oslo. I might be able to ship the router up but in the meantime my time is limited. I can do fully manual tool changes but it would sure be nice and probably more accurate if I didn't have to.

Thanks, if/when I ship the router up from France I will get in touch but hopefully I can get the sensor running sooner than that. Perhaps you would like to come down to the middle of nowhere southern France to help

I need to relocate my entire workshop back to Norway but as I am sure you know, finding a place in/near Oslo isn't exactly cheap.

Luke